WAA2 Golden Contacts Creep Action Thermal Protector Bimetal Thermostat

WAA2 creep action thermostat is specially designed for low voltage appliances temperature control,applicable to car seat,medical cushion and heating pad.It is focused on the low temperature range and small temperature differential.The thermostat can pre-set temperature,no need extra adjustment.The lead wire is optional and the case is live.Insulation sleeving might be needed.

Special Features

Electrical Specifications

Temperature Range and Tolerance

Special Notes
1. The temperature rising speed under calibration should be less than 1°C per 2 minutes;

2. Vacuum varnishing is not applicable. Specially treated thermostat is possible;

3. Varnishing under room temperature is possible. The temperature has to be less than 70°C;

4. If the contact resistance is over 50m Ohm, please connect the thermostat to the circuit of 60-100VAC, 2-5A and make the thermostat to action 2 or 3 times. Then, test the contact resistance again. The resistance would be decreased.

Dongguan Tianrui Electronics Co., Ltd. was founded in 2010. It covers an area of 4,000 square meters and has a monthly production capacity of 50 million pieces. We are committed to be a comprehensive circuit protection component manufacturer and solution supplier. We are specialized in the design, development, production and sale of over-current protection, over-temperature protection, and over-voltage protection. Our products are widely used in consumer electronics, automobiles, ships, communications, power supplies, power tools, new energy and other fields. Our products cover auto-fuse, auto-fuse holder, current fuse, current fuse holder, temperature fuse, SMD fuse, resettable fuse, circuit breaker, thermal switch and so on. our products meet international standards including UL,

UR,CSA,CUL,VDE,TUV,PSE,CE,CCC,ROHS certification etc.

Partners:

Our products not only sell well in mainland China but also in North & South America, Southeast Asia and many other countries and regions. Our company has independent development and design capabilities, plastic molding, and metal stamping departments, and is equipped with multiple automatic fuse production lines and testing equipment and strives to find the best raw material suppliers. As we always put the quality at the first place, we have built a complete quality assurance system, which is the guarantee of the safety and stability of each product. Meanwhile, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.

We are looking forward to the cooperation with you in the near future.